oscam

[belgiumserver]

any body have config and howto
oscam ubuntu server????

[emmanneil]

NAME
oscam.server - reader configuration file for OSCam

SYNOPSIS
The server configuration file for OSCam contains reader parameters.
sections in oscam.server are recurring (more than one reader possible).
At least one [reader] section is required.

DESCRIPTIONS
The [reader] section
device = device|<ip|hostname>,<port>[,<lport>]|pcsc
define local or remote reader
lport: remapping to local port
PCSC: number of PCSC readers, starting with 0

key = DES key
key for newcamd remote reader encryption

password = password
password for remote gbox reader

premium = ???
for gbox reader

account = user,password
user and password for remote reader

pincode = pincode
pincode for Conax and Cryptoworks SCs

services = [!]services[,[!]<services>]...
reader [de]assingment to service group, default=none

inactivitytimeout = minutes
inactivity timeout for newcamd reader, default:none

reconnecttimeout = minutes
TCP reconnect, if missing answers, default:none

disableserverfilter = 0|1
1 = ignore caid and ident settings of reader due faulty clients,
default=0

label = name
name for reader, required

fallback = 0|1
1 = define reader as fallback, standard and fallback reader must
have the same group, default:0

logport = 0|port
camd3 reader logport, camd3 UDP must be activated, only works if
theres no camd3 cascading, 0=disabled, default=0

caid = CAID[&<mask>][,CAID[&<mask>]]...
define CAID for reader, some protocols only support one CAID,
default:mask=FFFF

example: CAID=0100,0200&FFDF

boxid = NDS box ID
NDS receiver box id

aeskey = AES key
AES key for Viaccess SCs

detect = CD|DSR|CTS|RING|NONE|gpio[1-7]
status detect of card (NONE = no detection), default:CD

cardmhz = mhz
set standard SC frequency in units of 10 kHz, for Irdeto SC set to
600, refer to OVERCLOCKING, default:357

mhz = frequency
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in
overclocking mode, refer to OVERCLOCKING, default:357

deprecated = 0|1
1 = SC speed will not be changed, SC communication will remain on
normal ATR speed of 9600 baud, default:0

protocol = reader protocol
reader protocol, required:
mouse
smartreader
internal
serial
camd35|cs357x
cs378x
gbox
newcamd|newcamd525
newcamd524
cccam
radegast
pcsc

cccversion = <main version>.<version>.<sub version>
define CCcam version, default:none

exmaple: cccversion = 1.2.34

cccbuild = <4-digit number>
define CCcam build, default:none

exmaple: cccbuild = 5678

cccmaxhop = hops
define CCcam maximum SC distance, default:10

ident = <CAID>:<ident>[,ident]...[,<CAID>:<ident>[,ident]...]...
define CAID and ident for reader

exmaple: ident = 0100:123456,234567;0200:345678,456789

provid = ID
define provider ID for reader

class = [!]class[,[!]class]...
define class in hex for reader

example: class = 01,02,!1b,!2b

chid = CAID:ChID
define Irdeto ChID for reader

example: chid = 0100:12

showcls = quantity
number of classes subscriptions to show for Viaccess SCs, default=10

maxqlen = size
size of request queue for reader, default:128

group = groupname
reader assingment to group, required

emmcache = usecache,rewrite,logging
set EMM cache of local reader:
usecache = 0|1 1=enable EMM chaching, default:0
rewrite = determines how often one and the same EMM is written
logging = 0 = log errors only
1 = log all EMMs except the double EMMs
2 = log all EMMs

blocknano = nano[,nano]...|all
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only
valid for physical readers, default:none

example: blocknano = 45,93,7a,ff
blocknano = all

savenano = nano[,nano]....|all
list of EMM-nanos to save (in hex w/o 0x) or all EMM-nanos, only
valid for physical readers, default:none

example: savenano = 45,93,7a,ff
savenano = all

readnano = [path]filename
write file (usually a copy of a file saved by savenano) to your
smartcard, if no path is specified, the specified file is searched
for in the configuration directory, only valid for physical readers,
default:none

example: readnano = write.emm
readnano = /var/oscam/write.emm

n3_rsakey|rsakey = RSA key
RSA key for Nagravision SCs / CAM key data for Irdeto SCs

n3_boxkey|boxkey = box key
box key for Nagravision SCs / CAM key for Irdeto SCs

tiger_rsakey = RSA key
RSA key for Tiger Nagravision SCs

tiger_ideakey = IDEA key
IDEA key for Tiger Nagravision SCs

OVERCLOCKING
Dreambox and other internal readers

For Dreambox and other internal readers the highest possible clock
rate will be auto detected. The mhz parameter will be ignored.

Phoenix / Smartmouse reader

Overclocking does not work with Windows and Mac OS X. Set mhz
equivalent to the frequency of the reader. OSCam can not set the
frequency of the reader.

Smargo Smartreader+

Set the reader frequency with the native Smargo Smartreader+ tool
(srp_tools). Do not set mhz and cardmhz.

OSCam tries to set the baudrate automatically. A standard serial port
has limited baudrate settings, so SC overclocking might not work. When
using a serial reader the best way for overclocking is connecting it to
a FTDI based USB to serial port adapter.

If overclocking does not work, verify the effective baudrate in the
logfile. If it deviates too much from the requested baudrate, the SC
will not be recognized (no ATR) and the value for mhz should be
adjusted again. The higher the baudrate, the more accurate the effec
tive baudrate can be.

EXAMPLES
serial mouse compatible reader

[reader]
label = myserialmousereader
detect = cd
protocol = mouse
device = /dev/ttyS1
group = 1
caid = 0100
services = myservice,!thisservice

USB mouse compatible reader

[reader]
label = myusbmousereader
detect = cd
protocol = mouse
device = /dev/ttyUSB0
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 2
caid = 0200

camd 3.78x reader

[reader]
label = mycamd378xreader
protocol = cs378x
device = 192.168.0.1,1234
account = user,password
group = 3

newcamd reader

[reader]
label = mynewcamdreader
protocol = newcamd
key = 0102030405060708091011121314
device = 192.168.0.2,2345
account = user,password
group = 4

CCcam reader

[reader]
label = mycccamreader
protocol = cccam
device = 192.168.0.3,3456
account = user,password
group = 5
caid = 0300,0400,0500
cccversion = 1.2.3
cccbuild = 4567

PCSC reader

[reader]
label = mypcscreader
protocol = pcsc
device = 0
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 6
caid = 0600

[emmanneil]

example how to config for sky it working on Dreambox
Put the bin in /var/bin (e1) or usr/bin (e2) atributes 755


Put the 3 files:
oscam.conf
oscam.user
oscam.server

in /var/tuxbox/config (e1) or etc/tuxbox/config (e2)
oscam.conf

[global]
nice = -1
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 34000@093b:000000

oscam.server

[reader]
Label = SkyItalia
Protocol = Intern
Detect = CD
Device = /dev/sci0
group = 1
CAID = 093b
BoxID = ###### (your Boxkey)
#savenano = all
Customspeed = 0
EMMCache = 1,3,2
Fallback = 0
#blockua = 0
#blockga = 0
#blocksa = 0
#AU = 1
#Enable = 1

oscam.user

[account]
user = user
pwd = pass
group = 1
uniq = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia
monlevel = 0
CCcam.cfg

N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256